How To Check the Calibration of a Pressure Gauge?

There are a few different methods you can use to check the calibration of a pressure gauge:

Using a reference gauge: You can compare the reading on the pressure gauge you are testing to the reading on a reference gauge that you know is accurately calibrated. If the two readings are significantly different, then your pressure gauge may not be calibrated correctly.

Using a pressure standard: You can use a pressure standard, such as a pressure balance or a deadweight tester, to apply a known pressure to the gauge and see if it reads correctly.

Performing a bump test: You can perform a bump test by rapidly increasing and decreasing the pressure on the gauge. If the gauge's readings are stable and consistent during the test, then it is likely that the gauge is calibrated correctly.

Using a temperature-compensated gauge: If you are working with pressure gauges that are sensitive to temperature changes, you may need to use a temperature-compensated gauge to ensure accurate readings. These gauges automatically adjust for temperature variations to provide more accurate readings.

Sending the gauge out for calibration: If you are unsure of the accuracy of your pressure gauge, or if it has not been calibrated in a while, you may want to consider sending it out to a professional calibration laboratory to have it checked and calibrated.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.