How to Detect and Protect Against Gauge Failure?

There are several ways to detect and protect against pressure gauge failure:

Regular inspection: Regularly inspecting the pressure gauge for signs of damage or wear can help to identify potential problems before they become serious. Look for cracks, dents, or other physical damage to the gauge, as well as any unusual readings or fluctuations in pressure.

Calibration: Periodic calibration can help to ensure that the pressure gauge is accurate and functioning properly. Calibrating the gauge according to the manufacturer's recommendations and any applicable industry standards can help to identify any drift or degradation in the gauge's performance.

Protective measures: There are several protective measures that can be taken to help prevent pressure gauge failure:
  • Use a pressure gauge with a pressure relief valve or burst disc to protect against overpressure.
  • Use a gauge with a pressure limiting device to prevent damage from high pressure spikes.
  • Use a gauge with a diaphragm seal to protect the gauge from corrosive or viscous media.
  • Use a gauge with a cage or shield to protect it from physical damage.
  • Use a gauge with a corrosion-resistant housing or material to protect it from harsh environments.

Proper installation: Properly installing the pressure gauge according to the manufacturer's instructions can help to ensure that it functions correctly and is protected from damage.

Regular maintenance: Performing regular maintenance, such as cleaning and lubricating the gauge, can help to extend its useful life and reduce the risk of failure.
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.